The specialist for thin façade panels, such as HPL and fibre cement.
FZP II T PA Zykon ankkuri julkisivupaneelille
The concealed fixing solution for thin façade panels, such as HPL, fibre cement and solid surface panels. Use in conjunction with clasps systems on façades or with other attachments.
Legende = Zulassung vorhanden— = Zulassung nicht vorhanden
Gesehen 5 von 5 Variante(n)
Keine Produkte gefunden
Für Ihre Filter konnten leider keine Produkte gefunden werden
Die Vorteile / Produktbeschreibung
Edut
The anchor’s short geometry allows it to be used in thin panels with a thickness greater than 8 mm.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The positive-locking anchor is free from expansion pressure provides much better holding force than commonly available systems and allows for the use of large-format panels.
Anwendung und Zulassung
Sovellukset
Exterior façades
Interior façades
Façade reveals
Rakennusainet
Fibre cement
HPL panels
Thin panel materials (≥ 8 mm)
Es gelten die Details (Baustoffe, Lasten, etc.) der ggf. verfügbaren Zulassung. Weitere Dokumente finden Sie im Download Center.
Zulassungen
ETA-22/0669
DoP No. 0360
Montageanleitung
Toimintaperiaate / asennus
Use dry drilling with a diamond drill bit - first cylindrical, then conical - to drill an undercut hole.
When the undercut anchor is installed, an optimal, positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed flush to the absolute anchoring depth. After the anchor is set, the spacer washer will be in full contact with the surface of the material.
