Artikkeli numero 520369

fischer Zykon panel anchor FZP II 11 x 10 M6/T/9 PA

Huippu ominaisuudet

Design for thin panels, such as fibre cement or HPL.
Stress-free fixing enables high loads and use of thin panels.
The distance washers ensures a controlled, stress-free rotation of attachment parts.

The specialist for thin façade panels, such as HPL and fibre cement.

Edut

The anchor’s short geometry allows it to be used in thin panels with a thickness greater than 8 mm.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The positive-locking anchor is free from expansion pressure provides much better holding force than commonly available systems and allows for the use of large-format panels.

The concealed fixing solution for thin façade panels, such as HPL, fibre cement and solid surface panels. Use in conjunction with clasps systems on façades or with other attachments.

Toimintaperiaate / asennus

Use dry drilling with a diamond drill bit - first cylindrical, then conical - to drill an undercut hole.
When the undercut anchor is installed, an optimal, positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed flush to the absolute anchoring depth. After the anchor is set, the spacer washer will be in full contact with the surface of the material.

Mounting Strip 1 Picture

1 / 4

ETA Certification Document

pdf, ETA-11/0465

European Technical Assessment for fischer-Zykon-panel anchor FZP II T for "Royal Mosa stoneware" - Anchor for the rear fixing of facade panels made of ceramic plates "Royal Mosa stoneware" according to EN 14411:2016

Luotu 14.12.2016

DOP - Declaration of Performance

pdf, DoP No. 0262

Declaration of Performance for fischer Zykon-panel anchor FZP II T (for Royal Mosa)

Luotu 11.01.2021

DOP - Declaration of Performance

pdf, DoP No. 0756-CPD-0441

Declaration of Performance for fischer Zykon FZP II (Royal Mosa)

Voimassa19.06.2013
- 19.06.2028

ETA Certification Document

pdf, ETA-22/0669

European Technical Assessment for fischer-Zykon panel anchor FZP II T for "LAMINAM ceramic"

Luotu 22.09.2023

DOP - Declaration of Performance

pdf, DoP No. 0330

Declaration of Performance for fischer-Zykon-panel anchor FZP II T (for LAMINAM)

Luotu 17.01.2023

ETA Certification Document

pdf, ETA-23/0756

European Technical Assessment for fischer-Zykon panel anchor FZP II T

Luotu 08.12.2023

Lisätarvikkeet

ETA-hyväksyntä
Kiinnityssyvyys ( h_ef )	10 mm
Levyn min. paksuus	14 mm
Tyyppi	Dünnplattenanker
Kokonaispituus ( l )	12,5 mm
Projection length	9 mm
Kierre ( M )	M6
Cylindrical diameter	11 mm
Undercutdiameter	13,5 mm
Materiaali	A4
Kuorimateriaali	Polyamid
Väri	Vihreä
Määrä	250 Pa.
GTIN (EAN-Code)	4048962168518

fischer Zykon panel anchor FZP II 11 x 10 M6/T/9 PA

Edut / tuotekuvaus

Käyttö ja hyväksyntä

Kokoamisohje

Tekniset tiedot

Ladattavat asiakirjat