fischer Zykon panel anchor Tergo+ 11 x 6 M6/T/10 PA

Name: fischer Zykon panel anchor Tergo+ 11 x 6 M6/T/10 PA
Brand: fischer

Варианты продукта

CAD Data

Download of image data

Huippu ominaisuudet

Design for thin panels, such as fibre cement or HPL.
Stress-free fixing enables high loads and use of thin panels.
The distance washers ensures a controlled, stress-free rotation of attachment parts.

Art.-Nr. 802484
BSN 101T
Art.-Nr. 522402
FZPB 11T D12
Art.-Nr. 522398
FZPB 11T CNC
Art.-Nr. 541464
FZPB 11T CNC-DIA
Art.-Nr. 802506
STU 10 - 30
Art.-Nr. 802507
MST-D
Art.-Nr. 802732
HVL 11T
Art.-Nr. 804089
DPL 11T

The specialist for thin fibre cement façade panels by Equitone.

Edut

The anchors’ short geometry allows it to be used in thin panels with a thickness greater than 8 mm.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
The positive-locking anchor is free from expansion pressure and is attached at the fifth point in a structurally optimised location. This provides much better holding force than commonly available systems and allows for the use of large-format panels.

The concealed fixing solution for thin fibre cement façade panels from Equitone bigger than 8 mm in thickness, such as linea, tectiva, materia, natura, pictura. Use in conjunction with clasps systems on façades or with other attachments.

Toimintaperiaate / asennus

Use dry drilling with a diamond drill bit - first cylindrical, then conical - to drill an undercut hole.
When the undercut anchor is installed, an optimal, positive-locking connection is created between the expanding part and the drill hole.
The anchor is installed flush to the absolute anchoring depth. After the anchor is set, the spacer washer will be in full contact with the surface of the material.

Installation FZP II T Tergo+

1 / 4

ETA-hyväksyntä
Levyn min. paksuus	8 mm
Kiinnityssyvyys	6 mm
Kokonaispituus ( l )	18,5 mm
Installed anchor length	8,5 mm
Remaining thread length	10 mm
Kierre ( M )	M6
Cylindrical diameter	11 mm
Undercutdiameter	13,5 mm
Hyväksyntä maanjäristysalueille	C1 / C2
Järjestelmä	—
Määrä	250 Pa.
GTIN (EAN-Code)	4048962217704

fischer Zykon panel anchor Tergo+ 11 x 6 M6/T/10 PA

Преимущества / Описание продукта

Заявка и подтверждение

Инструкция по монтажу

Технические данные