The undercut anchor with an internal thread for M6 threaded screws in natural stone façade panels.

FZP II M6i Zykon ankkuri julkisivupaneelille

Concealed flush or stand-off installation solution with internal thread for natural stone façade panels. This technology can be used for both flush mounting of calibrated panels or reveal panels and to calibrate panel thickness tolerances caused by using the stand-off installation technology. Due to the integrated internal thread, there is no protruding external thread, allowing the panels to be prefabricated and transported securely. This improves the economic efficiency and flexibility of the system.

Tuotevaihtoehdot

Download of image data

Tuotevaihtoehdot

1 tuotevaihtoehto(a)

Kiinnityssyvyys

Levyn min. paksuus

Tyyppi

Kokonaispituus

Kierre

Cylindrical diameter

Katsottu 1 1 variantista

Edut

The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
The high-quality material of the anchor allows for higher pull-out loads than commonly used systems.
The integrated internal thread allows panels to be pre-fabricated and transported securely.

Toimintaperiaate / asennus

Wet diamond drilling - first cylindrical, depending on the application either to the absolute anchoring depth or to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
The anchor can either be installed flush to the absolute anchoring depth or can be installed in the conical undercut drill hole using stand-off installation.
The ability to compensate panel thickness tolerances helps create a flat façade surface

Mounting Strip 1 Picture

1 / 4

1
2
3
4

Kiinnityssyvyys ( h_ef )	12 mm
Levyn min. paksuus	20 mm
Tyyppi	Innengewindeanker
Kokonaispituus ( l )	12 mm
Kierre ( M )	M6
Cylindrical diameter	13 mm
Undercutdiameter	15,5 mm
Materiaali	A4
Kuorimateriaali	Polyamid
Määrä	250 Pa.
GTIN (EAN-Code)	4048962120653

FZP II M6i Zykon ankkuri julkisivupaneelille

Tuotevaihtoehdot

Edut / tuotekuvaus

Kokoamisohje