The ATK 601 wall holder set for push-through installation as a rod system.

Edut

Enables retrofitting of ventilated rainscreen façades.
By means of the push-through and stand-off installation, the wall holder can also be used in already insulated substrates.
Applicable for horizontal and vertical systems.
The passive house certification guarantees sustainable and energy-efficient fixing.
Different load levels are applicable through multiple anchorage depths.

The ATK 601 wall holder sets consist of an SXRL frame fixing, which absorbs the shear, tension and compressive forces, as well as an attachment part and a T-piece. Depending on the orientation of the T-piece, a vertical or horizontal aluminum subframe system can be assembled to the wall holder. The wall holder set is used as a rod system.

Ominaisuudet

Anchor: Polyamid and stainless steel or zinc-plated steel
Attachment parts: Aluminum (e.g. EN AW 6063) and stainless steel

Sovellukset

As a wall holder set for renovating existing façades
Consisting of a frame fixing anchor, as well as an attachment part and a T-piece
For load transfer into the building substrate of subframe systems in ventilated rainscreen façades

Rakennusainet

Vertically perforated brick
Aerated concrete
Hollow blocks made from lightweight concrete
Perforated sand-lime brick
Solid block made from lightweight and normal weight concrete
Solid brick
Solid sand-lime brick
Concrete ≥ C12/15

Löydät yksityiskohtaiset tiedot rakennusmateriaaleista rekisteröintiasiakirjasta.

Hyväksynnät

DoP: BWM-LE-005
DoP: BWM-LE-006
DoP: BWM-LE-007
DoP: BWM-LE-008

DOP - Declaration of Performance

pdf, DoP: BWM-LE-005

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: No performance declared

Luotu 08.05.2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-006

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: According to EN 1999 or EN 1993, see design specifications and calculations

Luotu 08.05.2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-007

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: Provided by ordering party

Luotu 08.05.2024

DOP - Declaration of Performance

pdf, DoP: BWM-LE-008

Declaration of Performance for parts for subframe system construction made of aluminium / stainless steel for building envelopes (Wall brackets, wall holders, extrusion profiles, clasps, fixing clamps) - Structural design: According to specification by the ordering party

Luotu 08.05.2024

Pituus	60 mm
Leveys	50 mm
Korkeus( H )	60 mm
Vahvuus	3 mm
Porareiän nimellishalkaisija( d₀ )	14 mm
Porareiän min. syvyys( h₁ )	245 mm
Pituus L2	220 / 200 mm
Hyötypituus kiinnityssyvyydellä 70 mm( t_fix )	152 mm
Hyötypituus kiinnityssyvyydellä 90 mm( t_fix )	132 mm
Tulpan pituus( l )	230 mm
Järjestelmä	—
Määrä	1 Pa.
GTIN (EAN-Code)	4048962398809

ATK601 Set E-14/230-T60/80/3 A4

Edut / Tuotekuvaus

Hakemus ja hyväksyminen

Kokoamisohje

Tekniset tiedot

Ladattavat asiakirjat