Artikkeli numero 548009

H-Profile ATK103S/ t=2 perf., 6M

For horizontal load transfer of ventilated rainscreen façades.

Edut

Optimised horizontal load transfer through transfer to the vertical profiles.
The compatible geometries of the clasps and horizontal profiles enable quickly and easily installation of the façade panels.
The horizontal profiles can be used universally in nearly all subrame systems.
The optimised geometry ensures material savings.
The possibility of combining different versions allows for increased flexibility.

The horizontal profiles of the subframe systems for ventilated rainscreen façades are made of aluminum. They are used for horizontal load transfer of the occurring loads and pass them on to the next subframe elements. The horizontal profiles are connected to the other subframe elements with system rivets. To allow the thermal expansion of the profile, a differentiation is made between slotted holes (sliding points) and fixed points (round holes) during assembly. The profiles are available in 6 m lengths as standard.

Pituus ( l )	6.000 mm
Vahvuus ( S )	2 mm
Materiaali/korroosiosuojaus	EN AW 6063 T66
Korkeus ( H )	62 mm
Muoto	C
Järjestelmä	—
Määrä	1 Pa.
GTIN (EAN-Code)	4048962340815

H-Profile ATK103S/ t=2 perf., 6M

Edut / tuotekuvaus

Käyttö ja hyväksyntä

Kokoamisohje

Tekniset tiedot

Ladattavat asiakirjat