Plasterboard fixing DUOBLADE

The self-drilling plasterboard plug for fast and easy installation

The fischer DUOBLADE is the youngest member of the innovative DUO-Line. It consists out of different components, which enable the best possible performance. The self-drilling tip allows a clean and effective drilling procedure. The fixing is screwed in the pre-positioned installation with the (cordless) screwdriver setting tool flush to the surface of the gypsum plasterboard. The fischer DUOBLADE is adapted for wood, metal and chipboard screws from 4 to 5 mm thickness as well as different hooks and eye screws. Consequently, it is universally suitable for fixing e.g. smoke detectors, curtain rods and shutters securely and quickly.

Tuote kuvaus

Advantages

An innovative product of the fischer DUO-Line with intelligent combinations for more power and more intelligence.
The self-drilling fischer DUOBLADE allows fast and easy installation in gypsum plasterboard and gypsum fibreboard.
The black metal tip guarantees simple and safe installation.
High torque when anchor is installed for the feelgood-factor and an optimum feeling when setting.
PZ 2 drive - same drive for plug and screw.

Saatavilla olevat tuote tyypit

Hakemus ja lupa

Sovellukset

Smoke detectors
Peilit
Curtain rods
Blinds
Lamps
Kuvat

Rakennusainet

Kipsilevyt, yksikerroksinen ja kaksikerroksinen laudoitus
Kipsikuitulevyt
Lightweight cement boards

* Rakennusmateriaaleista löydät yksityiskohtaiset tiedot rekisteröintiasiakirjoista.

Katso lisätietoja kohdasta Asiakirjat

Asennusohje

Functioning

The fischer DUOBLADE is suitable for pre-positioned installation.
The metal tip for better heat-resistant and cutting characteristics. Especially in double-layered plasterboard.
The fischer DUOBLADE can be used with wood, metal and chipboard screws of Ø4.0 to Ø5.0 mm.
In gypsum fibreboard, pre-drilling with a drill Ø 8mm is recommended.

Ladattavat tiedostot

Muut asiakirjat

Load table (PDF, 324 KB)